Prestressed Anchorage
- Home
- /
- Post Tensioning System
- /
- Fully Threaded Bar System

Fully Threaded Bar System
Model: YGM25, YGM32
Customization: can be customized
Composition: Fully threaded bar, nuts, and bearing plates
Application: Precision rolling rebar anchorages are suitable for different prestressed structures such as railways, highways, bridges, etc.
YGM type fully threaded bar system is mainly used for anchoring the prestressed threaded steel bars with diameters of 25mm and 32mm. There are dead-end anchors and stressing anchors, which are often used in bridge vertical prestressed tendons. YGM25 dead-end anchors and couplers are used in the pre-tensioning system, which can facilitate construction and save prestressed tendons. The function of the slit is to increase the nut’s ability to hold the prestressed tendons.

Specification of Fully Threaded Bar System
Model | Nut | Bearing Plate | Coupler | Spiral Reinforcement | ||||||
ΦA | B | □C | H | ΦD | L | ΦE | F | ΦG | N | |
YGM(L)18 | 45 | 54 | 100 | 20 | 40 | 110 | 90 | 40 | 6 | 4 |
YGM(L)25 | 57 | 65 | 120 | 24 | 50 | 135 | 115 | 40 | 8 | 4 |
YGM(L)32 | 65 | 72 | 140 | 24 | 60 | 160 | 130 | 40 | 8 | 4 |
YGM(L)36 | 76 | 85 | 160 | 30 | 70 | 180 | 150 | 50 | 10 | 4 |
YGM(L)40 | 83 | 90 | 200 | 40 | 75 | 200 | 180 | 50 | 12 | 5 |
YGM(L)50 | 93 | 110 | 220 | 50 | 85 | 230 | 200 | 50 | 12 | 5 |