Engineering Equipment
- Home
- /
- Engineering Equipment
- /
- Steel Wire Heading Machine
Steel Wire Heading Machine
Model: LD10, LD20, LD30
Wire diameter: φ3-φ9mm
Application: Widely used in the construction of bridges, sleepers, electric poles, large hydraulic press frames, large hydraulic buildings, nuclear reactor containment, protective shells, and roof panels in industrial and civil housing V-shaped folded plate, rising plate, and other components.
The LD steel wire heading machine is a hydraulic cold heading device. It is mainly used for the upsetting of the steel wire bundle. After finishing the blanking of the steel beam, weave it. Pass one end of the steel wire through the anchor cup and the upsetting head, and then upset the head after the other end of the wire bundle is anchored through the anchor cup or the anchor plate.
At present, it has been widely used in the construction of bridges, sleepers, electric poles, large hydraulic press frames, large hydraulic buildings, nuclear reactor containment, protective shells, and roof panels in industrial and civil housing V-shaped folded plate, rising plate, and other components.
Technical Data of Steel Wire Heading Machine
| Model | LD10 | LD20 | LD30 |
| Nominal Oil Pressure (MPa) | 39 | 43 | 40 |
| Wire Diameter (mm) | φ3-φ5 | φ6-φ7 | φ8-φ9 |
| Max Heading Force (kN) | 88 | 165 | 400 |
| Heading Stroke (mm) | 3.1 | 3.2 | 3.2 |
| Sequence Valve Pressure (MPa) | 6 | 7.5 | 10 |
| Clamp Stroke (mm) | 12 | 20 | 20 |
| Size (mm) | 98*279*199 | 125*300*249 | 180*330*260 |
| Weight (kg) | 10 | 15 | 20 |
