Engineering Equipment
- Home
- /
- Engineering Equipment
- /
- Roll Forming Machine
Roll Forming Machine
This roll forming machine is special used for making post tension galvanized smooth flat duct.
Product Sizes: 50mm*20mm
Material Info: Material type: Galvanized Steel
Material Thickness: 0.5mm
Yield Strength: Q195
Product Sizes: 50mm*20mm
Material Info:
Material type: Galvanized Steel
Material thickness: 0.5mm
Yield Strength: Q195
Machine working flow:
Manual De-coiler machine→Feeding & Guiding Device→Roller Forming Equipment→Saw Cutting Device→Product Stand Tables
Production line layout (for reference):
Specification of Roll Forming Machine
Forming speed | 0~4M/Min |
Product speed | 0~4M/min |
Roller material | #45 steel |
Forming stations | 18 stations |
Shaft diameter | 40mm |
Shaft material | 40Cr |
Forming structure | Guiding column |
Machine base frame | tube welding structure |
Transmission type | gear box |
Motor power of main machine | 7.5KW*1 set |
Motor brand of main machine | SIEMENS |
Bearing | needle roll bearing, taper bearing |
Bolt | 8.8 grades |
Cutting type | saw cutting |
Whole Line dimension | about 15m*1.25m*2.0 m (L*W*H) |
Machine installation area | 25*3m (L*W) |
Voltage | 380v, 50 Hz, 3phase |
